Location: Silloth Cumbria the job was to fit side sheets to a shed for sheeting wagons to do this we used single skin side sheets because the front and back of the shed were going to be left open. We fitted brackets that were fabricated in our workshop, we drilled and bolted them onto the …
Location: Talkin, Brampton, Cumbria House steel work ridge beams After receiving a phone call, the team were called out to Talkin to prep some steel work for a house. The steel required drilling for M20 bolts and two 8mm thick plates were to be bolted either side. The beams were then slung and lifted with …
Staircase / fire escape Prospect Aspatria After a extensive check from the team they diagnosed that the staircase needed to be removed as it was unsafe and dangerous, we designed and fabricated new stringers, steps and hand rails fully galvanised for a better and longer lasting finish, they then proceeded to cut out the old …
After receiving drawings, we meet with the builder and joiner on site to discuss the design and clarify measurements of steel legs, beams and A frame, our team then fabricated the frames and beams in the workshop ready for site fitting. The frames were then levelled up and bolted down using epoxy resin. Brackets were …
Sliding gates fitted at Silloth Made and fitted with a design from one of our customers the sliding gate has an opening of over 4.5m and has a wicket gate beside for easy foot traffic made and fitted in Silloth, we offer this service across the whole of Cumbria and the north of England …
Work carried out by J Johnstone Engineering Fabricated and site fitted pair of gates and posts with a opening of over 11m and a smaller single gate with a 4m opening all fitted security mesh to stop intruders we offer this service across Cumbria and the north west of England # site security # welder …
Some of the recent work from J Johnstone Engineering fabricated and site fitted steel truss posts and ridge beams at Dalston Carlisle we offer this work across the whole of Cumbria and the north west England, the weather wasn’t great but did not stop our experienced team # Engineering # Welder # fabrication # …